Brother GTX pro 설정 매뉴얼 - 페이지 17

{카테고리_이름} Brother GTX pro에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother GTX pro 40 페이지. Garment printer
Brother GTX pro에 대해서도 마찬가지입니다: 참조 매뉴얼 (13 페이지), 빠른 사용 설명서 (15 페이지), 사용자 설명서 (16 페이지)

페이지 인쇄

1. Connection to a Pc

Cable clamp

This is used to put the cables together.

Filter cover and Fan filter

Waste ink tank

Insert the waste ink tube into the main body. Fasten the waste

ink tank to the table leg or the like by using two pieces of string,

etc. Insert the waste ink tube into the waste ink tank.

X0344

If the tip of the waste ink tube is immersed in the

liquid, it will prevent the smooth flow of the

waste ink, to disable the ink suction operation of

the head cleaning function. After the waste ink

tank is fastened, the waste ink tube should be

cut so that the length from the tube connection

is 150 mm. The waste ink tube should be cut

IMPORTANT

diagonally.

Avoid placing the waste ink tube horizontally as

much as possible, and be sure not to let it bend.

Otherwise the waste ink may have difficulty

flowing through the tube.

Install the waste ink tank in the front, because it

must be emptied when the waste ink is full.

X0345

TIPS

150 mm

X0346