Brother GTX pro 설정 매뉴얼 - 페이지 18
{카테고리_이름} Brother GTX pro에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother GTX pro 40 페이지. Garment printer
Brother GTX pro에 대해서도 마찬가지입니다: 참조 매뉴얼 (13 페이지), 빠른 사용 설명서 (15 페이지), 사용자 설명서 (16 페이지)
페이지 인쇄
Setup of the printer
Mount the following supplied accessories inside the printer.
②
Open the cover to the direction a and shift the carriage to
direction s. Put on the gloves that came with the printer and
perform the following work.
Flushing receiver
Install the printer with the hole on the bottom oriented to the
front (there is no difference in white and color sides; they can
be mounted on either side).
7
①
X0347
X0348
Make sure that no flushing foam extends off the
outboard end portions of the flushing receiver. If
it does, it may interfere with the nozzle surface
IMPORTANT
of the head and may result in a problem
concerning firing of the print heads.
Carriage fixing pin
The carriage fixing pin will be needed when the
power is turned OFF due to power outage while
the printer is running and the recovery is not
expected for a while.
Secure the pin in the place illustrated above so
TIPS
as not to lose it.
The front cover will not close completely if the
carriage is fixed with the carriage fixing pin.
X0187