Fujitsu Suelo AGY40-KV 운영 매뉴얼 - 페이지 4
{카테고리_이름} Fujitsu Suelo AGY40-KV에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Suelo AGY40-KV 13 페이지.
Fujitsu Suelo AGY40-KV에 대해서도 마찬가지입니다: 운영 매뉴얼 (13 페이지)
페이지 인쇄
3. NAME OF PARTS
For appropriate signal transmission between the remote
controller and the indoor unit, keep the signal receiver
away from the following items:
- Direct sunlight or other strong lights
- Flat-panel television screen
In rooms with instantaneous fl uorescent lights, such as
inverter type ones, the signal may not be transmitted
properly. In such a case, consult the store of purchase.
3.1. Indoor unit
For Manual Auto operation
and Filter indicator reset
Air Outlet Selection switch
(Refer to page 6.)
Rope
Vertical
louver
(behind Airfl ow
Direction Louver
and Damper)
Indicator lamps
*1) Before starting operation, make sure that the intake grille is closed
completely. Incomplete closing may aff ect the proper function or
performance of the product.
*2) Indicator lamps light in the following conditions. It cannot see when
the indicator lamp is off .
Color
Name
TIMER
Orange
OPERATION
Green
ECONOMY
Green
En-3
CAUTION
(Refer to page 12.)
Air fi lter
Airfl ow Direction
Louver
Front panel
Drain hose
Intake grille
Damper
*2)
Remote controller
signal receiver
Operation or condition
Timer operation
Normal operation
Economy operation
10 °C Heat operation
3.2. Remote controller
When you use the optional remote controller, the appearance
and the operation procedure may diff er.
For details, please refer to the operation manual of each remote
controller.
: The setting must be done while the setting screen is displayed
for each function.
: The button is controllable only when the air conditioner is
operating.
Air cleaning
In this section, all the possible indicators are displayed for description.
fi lter
In actual operation, the display is linked with the button operation, and
only shows the necessary indicators for each setting.
For Basic operations ..................... Refer to page 5.
Starts or stops the air conditioner operation.
Changes the operation mode.
*1)
Adjusts the setting temperature.
For 10 °C Heat operation .............. Refer to page 8.
Activates the 10 °C Heat operation.
For Energy saving operation ........ Refer to page 8.
Activates or deactivates the Economy
operation.
For Outdoor Unit Low Noise operation
Activates or deactivates the Outdoor Unit Low
Noise operation.
Do not press this button in normal use.
It starts the test run (for use by authorized service personnel only).
NOTES: If the test run starts unintentionally, press
run.
Remote controller display
... Refer to page 8.
to quit the test