AEG 40809 사용자 지침 - 페이지 32

{카테고리_이름} AEG 40809에 대한 사용자 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG 40809 40 페이지.

Installation and connection instructions

Installing your washing machine

Removing transport packing

Warning!

All parts used to protect internal components of the washing machine

during transport must be removed before you use the washing machine for

the first time. Keep these parts and their attachments in case you need to

transport it again.

1. Remove the outer packaging from the washing ma-

chine. Tilt it backwards, rotate it by a quarter of a turn

on one of its back corners to take it off the transport base.

It will naturally be separated from the washing machine.

2. Open your washing machine cover and take out the

packing that holds the drum in place and the red plastic

wedge. Close the cover again.

3. Use a spanner to unscrew and remove the two red

spacers (A) at the back of the washing machine.

4. Now put the closers (B) provided in the pack attached

to the washing machine (fig. 4) into position to close the

openings that became visible, and do not forget to fold

back the plug into the middle.