Brother P-TOUCH CUBE 사용자 설명서 - 페이지 7

{카테고리_이름} Brother P-TOUCH CUBE에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother P-TOUCH CUBE 25 페이지. Tze tape
Brother P-TOUCH CUBE에 대해서도 마찬가지입니다: 사용자 설명서 (18 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (18 페이지)

페이지 인쇄

Set Up Your Label Printer

Charge the Battery

USB Port 

(on computer)

5 V DC, 0.5 A – 2 A

Connect the label printer to the computer using the included USB cable, or connect the USB cable to a USB AC

Adapter suitable for charging mobile devices, and plug the adapter into a power source. Charge until the Battery

LED turns off.

• Use the included USB cable.

• If charging the battery using a computer, make sure the computer is on.

Notes on Using the Rechargeable Li-ion Battery

• Charge the battery in environments between 50°F and 95°F / 10°C and 35°C, otherwise the battery will not charge,

and the Battery LED will remain lit.

• If the label printer is used to print, feed, or perform another operation while charging, charging may stop even

though the battery is not fully charged. Charging resumes when the operation is completed.

Rechargeable Li-ion Battery Characteristics

To ensure the highest performance and longest life from the rechargeable Li-ion Battery, when storing the label

printer for a long period of time:

• Charge once every six months.

• Store in a cool dry place out of direct sunlight, between 50°F and 95°F / 10°C and 35°C.

USB AC Adapter

(not included)

5 V DC, 0.5 A – 2 A