Brother P-TOUCH CUBE Посібник користувача - Сторінка 7

Переглянути онлайн або завантажити pdf Посібник користувача для Виробник етикеток Brother P-TOUCH CUBE. Brother P-TOUCH CUBE 25 сторінок. Tze tape
Також для Brother P-TOUCH CUBE: Посібник користувача (18 сторінок), Посібник користувача (18 сторінок), Посібник користувача (18 сторінок), Посібник користувача (18 сторінок)

Set Up Your Label Printer

Charge the Battery

USB Port 

(on computer)

5 V DC, 0.5 A – 2 A

Connect the label printer to the computer using the included USB cable, or connect the USB cable to a USB AC

Adapter suitable for charging mobile devices, and plug the adapter into a power source. Charge until the Battery

LED turns off.

• Use the included USB cable.

• If charging the battery using a computer, make sure the computer is on.

Notes on Using the Rechargeable Li-ion Battery

• Charge the battery in environments between 50°F and 95°F / 10°C and 35°C, otherwise the battery will not charge,

and the Battery LED will remain lit.

• If the label printer is used to print, feed, or perform another operation while charging, charging may stop even

though the battery is not fully charged. Charging resumes when the operation is completed.

Rechargeable Li-ion Battery Characteristics

To ensure the highest performance and longest life from the rechargeable Li-ion Battery, when storing the label

printer for a long period of time:

• Charge once every six months.

• Store in a cool dry place out of direct sunlight, between 50°F and 95°F / 10°C and 35°C.

USB AC Adapter

(not included)

5 V DC, 0.5 A – 2 A