Brother P-TOUCH CUBE PT-P300BT 사용자 설명서 - 페이지 15
{카테고리_이름} Brother P-TOUCH CUBE PT-P300BT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother P-TOUCH CUBE PT-P300BT 18 페이지. Tze tape
Brother P-TOUCH CUBE PT-P300BT에 대해서도 마찬가지입니다: 사용자 설명서 (18 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (18 페이지)
페이지 인쇄
- 1. Safety Precautions
- 2. General Precautions
- 3. Performing Routine Maintenance
- 4. Unpack the PT-P300BT
- 5. Specifications
- 6. Troubleshooting
- 7. Troubleshooting (Cont)
- 8. Parts and Components
- 9. Install Batteries or Connect the AC Adapter
- 10. Inserting the Tape Cassette
- 11. Turn the Label Printer on or off
- 12. LED Indications
- 13. Pair the Label Printer with Your Mobile Device
- 14. Print Labels
4. Turn the Label Printer On or Off
Press the Power Button to power on. Hold the Power Button for 0.5 seconds to power off.
5. LED Indications
The label printer's LED indicates the label printer's status.
LED
Not lit
Steady green light
Flashing green light
(Lit for 3 seconds, then off for 1
second)
Flashing green light
(0.5 second intervals)
Flashing orange light
(1 second intervals)
LED
Steady red light Booting
Flashing red light
(1 second
intervals)
Flashing red light
(0.5 second
intervals)
Power Off
Standby
Receiving data from your mobile device.
Insufficient charge or battery failure.
Condition
installed.
installed.
The machine failed to
communicate with your
mobile device.
Cutter error
Incompatible AC Adapter used Use the correct AC Adapter.
System error
Condition
How to Clear
an Error
Transfer the program again.
If the problem is still not resolved, contact
Brother Customer Service.
Lightly press the
Power Button.
Restart the label
printer.
Lightly press the Power Button.
Please contact Brother Customer
Service.
Solution
Insert the correct
Tape Cassette.
Connect via
Bluetooth and try
sending the label
from your mobile
device to the
machine again.