Brother P-TOUCH CUBE PT-P300BT 사용자 설명서 - 페이지 9

{카테고리_이름} Brother P-TOUCH CUBE PT-P300BT에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother P-TOUCH CUBE PT-P300BT 18 페이지. Tze tape
Brother P-TOUCH CUBE PT-P300BT에 대해서도 마찬가지입니다: 사용자 설명서 (18 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (18 페이지), 사용자 설명서 (18 페이지)

페이지 인쇄

Troubleshooting (cont)

Problem

try to print.

The tape does not feed

correctly, or the tape gets stuck

inside the machine.

The tape stops halfway.

I cannot print from my mobile

device.

is added to the left margin of

each label.

The ink ribbon has separated

from the ink roller.

instructions, see 2. Install Batteries or Connect the AC

Adapter section in this guide.

recommended adapter: the AD-24ESA/AD-24ESAW/

AD-24ESA-01/AD-24ESAW-01.

Do not try to cut a label while it is printing.

Press the Power Button twice quickly to feed the tape, and

also use your app to configure the machine to always cut

the last label.

Check that your machine and your mobile device are

connected via Bluetooth. See 6. Pair the Label Printer

with Your Mobile Device section in this guide.

enough to communicate.

To prevent a blank space from being added on the second

and subsequent labels, use the following cut option settings:

P-touch Design&Print

- Cut the last label: OFF

- Special Tape: OFF

iPrint&Label

- Chain Printing: ON

Power Button twice to feed the tape, and then press the

Tape Cutter Lever to cut the tape.

If the ink ribbon is broken, replace the tape cassette.

If not, leave the tape

uncut and remove the

tape cassette, then wind

the loose ink ribbon back

onto the spool.

er Board. For a description of how to do so,

see the Accessories section in this guide.

Solution

e the Cutter while printing.

not paired with another device.

Spool