Brother P-TOUCH CUBE PT-P300BT Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Brother P-TOUCH CUBE PT-P300BT. Brother P-TOUCH CUBE PT-P300BT 18 halaman. Tze tape
Juga untuk Brother P-TOUCH CUBE PT-P300BT: Panduan Pengguna (18 halaman), Panduan Pengguna (18 halaman), Panduan Pengguna (18 halaman), Panduan Pengguna (18 halaman), Panduan Pengguna (18 halaman)

Halaman Cetak
Brother P-TOUCH CUBE PT-P300BT Panduan Pengguna

Troubleshooting (cont)

Problem
try to print.
The tape does not feed
correctly, or the tape gets stuck
inside the machine.
The tape stops halfway.
I cannot print from my mobile
device.
is added to the left margin of
each label.
The ink ribbon has separated
from the ink roller.
instructions, see 2. Install Batteries or Connect the AC
Adapter section in this guide.
recommended adapter: the AD-24ESA/AD-24ESAW/
AD-24ESA-01/AD-24ESAW-01.
Do not try to cut a label while it is printing.
Press the Power Button twice quickly to feed the tape, and
also use your app to configure the machine to always cut
the last label.
Check that your machine and your mobile device are
connected via Bluetooth. See 6. Pair the Label Printer
with Your Mobile Device section in this guide.
enough to communicate.
To prevent a blank space from being added on the second
and subsequent labels, use the following cut option settings:
P-touch Design&Print
- Cut the last label: OFF
- Special Tape: OFF
iPrint&Label
- Chain Printing: ON
Power Button twice to feed the tape, and then press the
Tape Cutter Lever to cut the tape.
If the ink ribbon is broken, replace the tape cassette.
If not, leave the tape
uncut and remove the
tape cassette, then wind
the loose ink ribbon back
onto the spool.
er Board. For a description of how to do so,
see the Accessories section in this guide.
Solution
e the Cutter while printing.
not paired with another device.
Spool