Brother PT-MT 서비스 매뉴얼 - 페이지 29

{카테고리_이름} Brother PT-MT에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother PT-MT 45 페이지.
Brother PT-MT에 대해서도 마찬가지입니다: 부품 참조 목록 (14 페이지)

[ 4 ]

Installing the Chassis ASSY

(1) If the chassis ASSY has been disassembled, assemble the components, referring to

page III-16.

(2) As shown in Figure 3.2-10, fit the cutter lever onto the shaft on the chassis ASSY.

(3) Put the chassis ASSY together with the cutter lever back into the bottom cover.

NOTE: Route the head flat cable as illustrated below.

(4) Secure the chassis ASSY with three screws.

(5) Solder the motor lead wires to the main PCB as shown below.

NOTE: Check the wire ID colors, then solder the black and red wires to the BLACK

( ) and RED (+) points, respectively.

Figure 3.2-7 Installing the Chassis ASSY and Soldering the Motor Lead Wires

III - 14