Brother PT-MT 서비스 매뉴얼 - 페이지 33

{카테고리_이름} Brother PT-MT에 대한 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother PT-MT 45 페이지.
Brother PT-MT에 대해서도 마찬가지입니다: 부품 참조 목록 (14 페이지)

페이지 인쇄
Brother PT-MT 서비스 매뉴얼
[ 6 ]
Final Operation Check
After reassembling, do the following:
(1) Load dry cells.
(2) Press the ON/OFF key.
(3) Turn the select dial to the desired position and press the Enter key. The selected
symbol should be established.
(4) Press the Print key. The selected item should be printed out.
(5) Push the cutter lever. The cutter lever should work smoothly and cut off the tape.
(6) Check that the printout is not faint.
(7) Open the cassette cover and remove the tape cassette and dry cells.
The above final operation check should be usually made. For your reference, the
inspection mode is described in [ 7 ].
III - 18