AEG L6FBI824U 사용자 설명서 - 페이지 25

{카테고리_이름} AEG L6FBI824U에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG L6FBI824U 32 페이지.

without removing. Let the water flow

out.

5. When the bowl is full of water, turn

the filter back and empty the

container.

6. Repeat the steps 4 and 5 until the

water stops to flows out.

7. Turn the filter anti-clockwise to

remove it.

8. If it is necessary, remove fluff and

objects from the filter recess.

9. Make sure that the impeller of the

pump can rotate. If it does not

rotate, contact the Authorised

Service Centre.

10. Clean the filter under the water tap.

11. Put the filter back into the special

12. Close the pump cover.

12.8 Cleaning the inlet hose

and the valve filter

It is recommended to clean both the

filters of the inlet hose and valve

occasionally to remove any deposit,

collected over the time:

1. Remove the inlet hose from the tap

guides by turning it clockwise. Make

sure that you tighten the filter

correctly to prevent leakages.

and clean the filter.

ENGLISH