AEG L6FBI824U Kullanıcı Kılavuzu - Sayfa 25

Yıkayıcı AEG L6FBI824U için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AEG L6FBI824U 32 sayfaları.

without removing. Let the water flow

out.

5. When the bowl is full of water, turn

the filter back and empty the

container.

6. Repeat the steps 4 and 5 until the

water stops to flows out.

7. Turn the filter anti-clockwise to

remove it.

8. If it is necessary, remove fluff and

objects from the filter recess.

9. Make sure that the impeller of the

pump can rotate. If it does not

rotate, contact the Authorised

Service Centre.

10. Clean the filter under the water tap.

11. Put the filter back into the special

12. Close the pump cover.

12.8 Cleaning the inlet hose

and the valve filter

It is recommended to clean both the

filters of the inlet hose and valve

occasionally to remove any deposit,

collected over the time:

1. Remove the inlet hose from the tap

guides by turning it clockwise. Make

sure that you tighten the filter

correctly to prevent leakages.

and clean the filter.

ENGLISH