Fujitsu ETERNUS DX Disk 구성 매뉴얼 - 페이지 11

{카테고리_이름} Fujitsu ETERNUS DX Disk에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu ETERNUS DX Disk 32 페이지. Server connection, fcoe for linux driver settings for converged network adapter cards
Fujitsu ETERNUS DX Disk에 대해서도 마찬가지입니다: 사용자 설명서 (35 페이지), 사용자 설명서 (42 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (44 페이지), 구성 매뉴얼 (28 페이지), 구성 매뉴얼 (29 페이지), 구성 매뉴얼 (25 페이지), 구성 매뉴얼 (35 페이지), 구성 매뉴얼 (31 페이지), 구성 매뉴얼 (43 페이지), 구성 매뉴얼 (21 페이지), 구성 매뉴얼 (24 페이지)

Chapter 2

Checking the Server Environment

Connection to servers is possible in the following environments.

Check the "Server Support Matrix" for server environment conditions.

2.1

For supported servers, refer to "Server Support Matrix" and the following URL:

http://hcl.xensource.com/

If a logical unit (LUN) of the ETERNUS DX/AF storage systems is used as a boot disk, refer to "Server Support

Matrix" to check the server environment.

2.2

The Fibre Channel switches that can be connected depend on the connection configuration that is used (the

OS and the ETERNUS DX/AF). Refer to "Server Support Matrix for FC-SWITCH".

2.3

Refer to the "Server Support Matrix".

2.4

Connection Compatibility of ETERNUS DX/AF Storage Systems

to XenServer Host

Refer to the "Server Support Matrix".

2.5

For details on the procedure and notes about installing a Virtual Machine that is supported by XenServer,

refer to the manuals that can be obtained on the following Citrix web-site:

https://support.citrix.com/en/products/xenserver

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Citrix

XenServer

P3AM-4572-19ENZ0