Fujitsu Primergy RX100 S3 수동 시작 - 페이지 4

{카테고리_이름} Fujitsu Primergy RX100 S3에 대한 수동 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Primergy RX100 S3 9 페이지.
Fujitsu Primergy RX100 S3에 대해서도 마찬가지입니다: 서비스 보충 설명서 (45 페이지)

페이지 인쇄

1. Bios Setup Utility

Turning on the power and setting hardware

Normally, hardware settings are not required to be changed from the default.

However, in the following cases, start each utility and check/change hardware settings.

��

"Chapter 8 Configuring Hardware and Utilities"

l BIOS Setup Utility

Change the settings in the following cases:

- When changing the drive to start the server

- When installing/removing optional devices

- When performing remote installation

Print the "Configuration Sheets" - "Configuration sheet" in the PRIMERGY Document and Tool CD and enter hardware con-

figuration and BIOS Setup Utility parameters.

Turn on the power supply of the pe-

ripheral devices, such as the display.

Turn on the power and insert the

ServerStart CD-ROM immediately.

1. Press the power switch on the front of the

server.

2. Press the CD-ROM eject button, and insert

the ServerStart CD-ROM.

��

l SCSI Setup Utility

Change the settings in the following case:

- When a hard disk is added

Set the hardware.

If no hardware settings are performed, skip to the

next step when a message to insert the ServerStart

floppy disk is displayed.

BIOS Setup Utility

1. When the " <F2> BIOS Setup / <F12>

Boot Menu" message appears during serv-

er startup (during POST), press the [F2]

key.

2. Check/change the settings.

3. Select "Save Changes & Exit" from the

Exit menu and press the [Enter] key.

SCSI Setup Utility

1. When the "Press Ctrl-C to start LSI Logic

Configuration Utility..." message appears

during server startup (during POST), press

the [Ctrl] + [C] keys.

2. Check/change the settings.

3. Press [Esc] key, and display exit window.

4. Select "Exit the Configuration Utilities"

and press the [Enter] key.

For the use of Linux distribution with this server, refer to

Fujitsu PRIMERGY website(http://primergy.fujitsu.com).