Fujitsu Primergy RX100 S3 수동 시작 - 페이지 5
{카테고리_이름} Fujitsu Primergy RX100 S3에 대한 수동 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Primergy RX100 S3 9 페이지.
Fujitsu Primergy RX100 S3에 대해서도 마찬가지입니다: 서비스 보충 설명서 (45 페이지)
페이지 인쇄
7
Installing the OS
This section explains the procedures to install the OS using ServerStart.
For details about OS installation procedures when not using ServerStart, refer to the "User's Guide".
������������
"Chapter 4 Manual OS Installation"
1
Insert the ServerStart floppy disk
supplied with this server, and click
[Create].
A network setup window for remote installation
appears.
2
Click [OK].
3
Click [Build a ServerStart Floppy Disk].
The completion message appears.
4
Click [OK].
"
Please Select your keyboard
5
Select your keyboard language from
the drop-down list and click [OK].
The subsequent start procedure may take several
minutes. The [Welcome to ServerStart] window ap-
pears.
6
Click [Click here to prepare and/or initi-
ate an operating system installation].
The [Select the operating system to be installed]
window appears.
Click [Special Hints on Operating System Installa-
tion] and read the contents.
7
Click [MS Windows Operating Sys-
tems].
8
Click the OS to be installed.
9
Click[Prepare & initiate an unattended
installation of (OS)].
The guided mode for the selected OS starts up.
"
window appears.
5
10
Click [Start here to create a complete
configuration file].
The [Open ServerStart Configuration File] window
appears.
11
Select the configuration file and click
[Create].
The wizard starts up automatically.
12
Set the server information.
Click the wizard sequentially,
and enter the server information.
Clicking [help] under the wizard window displays
explanations of items and setting hints.
1.
RAID and Disk wizard
Configure RAID, and create and format
hard disk partitions.
2.
(OS) Install wizard
Set the computer information, user infor-
mation, network protocol, etc.
3.
Application wizard
It is recommended to install the applica-
tion selected as default.
13
Click [Close and save Configuration
File].
Click [Save As] and save the configuration file.
14
Click [Click here, to Start the Installa-
tion of (OS)].
The license window appears.
Follow the window instructions.
Incorrect settings will cause errors to be dis-
played.
Enter correct values manually to continue the
process.
15
When a message indicating installation
completion appears, press any key.
16
Restart the system.
Click [Start] - [Shutdown]. Select [Restart] and
click [OK].
17
When the system restarts, log on to
the server using the Administrators
account for the local computer.