Fujitsu Primergy RX100 S4 서비스 보충 설명서 - 페이지 17

{카테고리_이름} Fujitsu Primergy RX100 S4에 대한 서비스 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Primergy RX100 S4 43 페이지.
Fujitsu Primergy RX100 S4에 대해서도 마찬가지입니다: 수동 시작 (8 페이지)

페이지 인쇄
Fujitsu Primergy RX100 S4 서비스 보충 설명서
4

Replacement routines

V
CAUTION!
Observe the safety instructions in the
et seqq. .
4.1

Preparation

Opening the server
Ê Terminate all applications and shut down the server correctly.
Ê If your operating system has not switched off the server, press the on/off
button.
Ê Pull all power connectors out of the power outlets.
Ê Disconnect all cables on the rear of the server.
Ê Loosen the two knurled screws and pull the server as far as possible out of
the rack.
Depending on how accessible the server is in the rack cabinet, it can make
sense to remove it from the cabinet. You will find a detailed description in the
Options Guide or the Operating Manual.
Ê Loosen the green knurled screw at the server's rear side.
Ê Push the top cover approxiate 2 cm in direction of the server's rear side.
Ê Remove the top cover.
RX100 S4
chapter "Safety notes" on page 11
Service Supplement
17