Fujitsu Primergy RX100 S4 서비스 보충 설명서 - 페이지 29

{카테고리_이름} Fujitsu Primergy RX100 S4에 대한 서비스 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Primergy RX100 S4 43 페이지.
Fujitsu Primergy RX100 S4에 대해서도 마찬가지입니다: 수동 시작 (8 페이지)

페이지 인쇄
Fujitsu Primergy RX100 S4 서비스 보충 설명서
Replacement routines
4.8

Replacing the system board

V
CAUTION!
There are two versions of the system board D2532 with the part numbers
S26361-D2532-A10 (SAS version) and S26361-D2532-B10 (SATA
version).
The PRIMERGY RX100 S4 server's chassis ID is stored on both the LED board
and the system board. If in the event of failure, the LED board or the system
board which has to be replaced must have the chassis ID rewritten.
Ê Open the server as described in the
Ê Remove all external cables.
Ê Remove the riser card holder with the installed controllers (for a description
see the Options Guide).
Ê Remove the processor (for a description see
processor" on page
Ê Remove the memory modules (for a description see the Options Guide).
Ê Remove all cables which may be connected to the system board.
RX100 S4
section "Preparation" on page
25).
Service Supplement
Replacing the system board
section "Replacing the
17.
29