Fujitsu Primergy RX100 S4 서비스 보충 설명서 - 페이지 30
{카테고리_이름} Fujitsu Primergy RX100 S4에 대한 서비스 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Primergy RX100 S4 43 페이지.
Fujitsu Primergy RX100 S4에 대해서도 마찬가지입니다: 수동 시작 (8 페이지)
페이지 인쇄
Replacing the system board
Figure 14: Removing the screws
Ê Remove the nine screws from the system board.
Ê Carefully lift the system board out of the chassis at a slight angle.
Ê Check the settings on the new system board (for a description see the
Technical Manual of the system board).
Ê Insert the system board by holding it at a slight angle.
V
CAUTION!
Never remove the system board by grapping the fixed heat sinks!
Be careful not to damage the EMI springs, these are required for the
system to comply with applicable EMC regulations and satisfy cooling
requirements and fire protection measures.
30
Service Supplement
Replacement routines
CPU
RX100 S4