Fujitsu PRIMERGY TX120 S2 서비스 보충 설명서 - 페이지 26

{카테고리_이름} Fujitsu PRIMERGY TX120 S2에 대한 서비스 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu PRIMERGY TX120 S2 38 페이지.

Replacing the system fans

Figure 11: Removing the system fan 2

Ê Fold up the air duct.

Ê Pull off the four buttons from the air inlet.

Ê Push the fan at the upper side backwards and pull it upward.

Ê Insert the new system fan. Push the fan down, until it engages completely.

Make sure that the cable has been routed in the right way (cable outlet

facing the connector on the system board).

Ê Plug the system fan cable on the adapter connector.

Ê Push the four buttons into the air inlet.

Ê Close the air duct back to its original position until the locks are engaged into

the air inlet.

Ê Close the server and connect all power plugs (for a detailed description see

the Options Guide).

Service Supplement

Replacement routines

TX120 S2