Fujitsu SPARC Enterprise M5000 기능 설명서 - 페이지 25

{카테고리_이름} Fujitsu SPARC Enterprise M5000에 대한 기능 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu SPARC Enterprise M5000 30 페이지. Rci build procedure
Fujitsu SPARC Enterprise M5000에 대해서도 마찬가지입니다: 보충 설명서 (36 페이지), 제품 노트 (44 페이지), 시작하기 매뉴얼 (4 페이지)

페이지 인쇄
Fujitsu SPARC Enterprise M5000 기능 설명서
2. Execute the showcod command.
The output displays the server's Chassis HostID, number of COD permits,
headroom quantity, and number of COD permits reserved for each domain. For
example:
XSCF> showcod
Chassis HostID: 80e3e446
PROC Permits installed: 10
PROC Headroom Quantity: 0
PROC Permits reserved for domain 0: 4
PROC Permits reserved for domain 1: 0
PROC Permits reserved for domain 2: 0
PROC Permits reserved for domain 3: 0
To display COD information only for a specific domain, use the showcod -d
domain_id command, where domain_id is 0-23 depending on system configuration.

▼ To Display COD Activation History

1. Execute the showcodactivationhistory command.
XSCF>
showcodactivationhistory

▼ To Display COD Permit Status

1. Log in to the XSCF console with platadm or platop privileges.
Capacity on Demand (COD) Administration
13