Fujitsu SPARC Enterprise M5000 기능 설명서 - 페이지 23

{카테고리_이름} Fujitsu SPARC Enterprise M5000에 대한 기능 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu SPARC Enterprise M5000 30 페이지. Rci build procedure
Fujitsu SPARC Enterprise M5000에 대해서도 마찬가지입니다: 보충 설명서 (36 페이지), 제품 노트 (44 페이지), 시작하기 매뉴얼 (4 페이지)

페이지 인쇄
Fujitsu SPARC Enterprise M5000 기능 설명서

▼ To Enable, Increase, or Decrease Headroom

1. Log in to the XSCF console with platadm privileges.
2. Execute the showcod command with no options.
For example:
XSCF> showcod
Chassis HostID: 80e3e446
PROC Permits installed: 10
PROC Headroom Quantity: 0
PROC Permits reserved for domain 0: 4
PROC Permits reserved for domain 1: 0
PROC Permits reserved for domain 2: 0
PROC Permits reserved for domain 3: 0
3. Type the setcod command, specifying headroom.
For example:
XSCF> setcod headroom
where headroom can be a number from 1 to 4. For example:
XSCF> setcod 4
WAARNING: Using headroom requires you to install key(s) within 30
days.
Do you agree? [y|n]: y
4. Verify the headroom quantity is correct by executing the showcod command.
For example, if you entered 4 as the headroom number, the output would be
similar to:
XSCF> showcod
Chassis HostID: 80d88800
PROC Permits installed: 8
PROC Headroom Quantity: 4
...
Note – When headroom is in use, the XSCF console displays periodic warning
messages requesting installation of new COD permits. The warning messages
continue to be displayed until new keys are installed or headroom is no longer in
use.
Capacity on Demand (COD) Administration
11