Fujitsu SPARC Enterprise M5000 Funkcje Podręcznik - Strona 23

Przeglądaj online lub pobierz pdf Funkcje Podręcznik dla Serwer Fujitsu SPARC Enterprise M5000. Fujitsu SPARC Enterprise M5000 30 stron. Rci build procedure
Również dla Fujitsu SPARC Enterprise M5000: Podręcznik uzupełniający (36 strony), Uwagi dotyczące produktu (44 strony), Podręcznik dla początkujących (4 strony)

▼ To Enable, Increase, or Decrease Headroom

1. Log in to the XSCF console with platadm privileges.

2. Execute the showcod command with no options.

For example:

XSCF> showcod

Chassis HostID: 80e3e446

PROC Permits installed: 10

PROC Headroom Quantity: 0

PROC Permits reserved for domain 0: 4

PROC Permits reserved for domain 1: 0

PROC Permits reserved for domain 2: 0

PROC Permits reserved for domain 3: 0

3. Type the setcod command, specifying headroom.

For example:

XSCF> setcod headroom

where headroom can be a number from 1 to 4. For example:

XSCF> setcod 4

WAARNING: Using headroom requires you to install key(s) within 30

days.

Do you agree? [y|n]: y

4. Verify the headroom quantity is correct by executing the showcod command.

For example, if you entered 4 as the headroom number, the output would be

similar to:

XSCF> showcod

Chassis HostID: 80d88800

PROC Permits installed: 8

PROC Headroom Quantity: 4

...

Note – When headroom is in use, the XSCF console displays periodic warning

messages requesting installation of new COD permits. The warning messages

continue to be displayed until new keys are installed or headroom is no longer in

use.

Capacity on Demand (COD) Administration