Fujitsu SPARC Enterprise M5000 Посібник з експлуатації - Сторінка 23

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Сервер Fujitsu SPARC Enterprise M5000. Fujitsu SPARC Enterprise M5000 30 сторінок. Rci build procedure
Також для Fujitsu SPARC Enterprise M5000: Додатковий посібник (36 сторінок), Примітки до продукту (44 сторінок), Посібник для початківців (4 сторінок)

▼ To Enable, Increase, or Decrease Headroom

1. Log in to the XSCF console with platadm privileges.

2. Execute the showcod command with no options.

For example:

XSCF> showcod

Chassis HostID: 80e3e446

PROC Permits installed: 10

PROC Headroom Quantity: 0

PROC Permits reserved for domain 0: 4

PROC Permits reserved for domain 1: 0

PROC Permits reserved for domain 2: 0

PROC Permits reserved for domain 3: 0

3. Type the setcod command, specifying headroom.

For example:

XSCF> setcod headroom

where headroom can be a number from 1 to 4. For example:

XSCF> setcod 4

WAARNING: Using headroom requires you to install key(s) within 30

days.

Do you agree? [y|n]: y

4. Verify the headroom quantity is correct by executing the showcod command.

For example, if you entered 4 as the headroom number, the output would be

similar to:

XSCF> showcod

Chassis HostID: 80d88800

PROC Permits installed: 8

PROC Headroom Quantity: 4

...

Note – When headroom is in use, the XSCF console displays periodic warning

messages requesting installation of new COD permits. The warning messages

continue to be displayed until new keys are installed or headroom is no longer in

use.

Capacity on Demand (COD) Administration