Fujitsu SPARC Enterprise M5000 Посібник з експлуатації - Сторінка 22

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Сервер Fujitsu SPARC Enterprise M5000. Fujitsu SPARC Enterprise M5000 30 сторінок. Rci build procedure
Також для Fujitsu SPARC Enterprise M5000: Додатковий посібник (36 сторінок), Примітки до продукту (44 сторінок), Посібник для початківців (4 сторінок)

▼ To Reserve COD Permits for a Domain

You need to reserve COD permits only if you want to make sure a specific number of

COD permits are allocated to a particular domain.

1. Log in to the XSCF console with platadm privileges.

2. Execute the setcod command with or without options.

a. Execute the command with options:

XSCF> setcod -d domain_id cod_cpu_quantity

For example:

XSCF> setcod -d 1 4

b. Execute the setcod command with no options.

XSCF> setcod

PROC Permits installed: 8

PROC Headroom Quantity (0 to disable, 4 MAX) [0]:4

WARNING: Using headroom requires you to install key(s) within 30

days.

PROC Permits reserved for domain 0 (6 MAX) [0]:

PROC Permits reserved for domain 1 (6 MAX) [2]:

PROC Permits reserved for domain 2 (4 MAX) [0]:

PROC Permits reserved for domain 3 (4 MAX) [0]:

3. Verify the allocation with the showcod command.

SPARC Enterprise Mx000 Servers Capacity on Demand (COD) User's Guide • January 2012

Executing the command without options lets you reserve COD permits for all

domains at once. First, the number of available COD permits (eight in the

example below) and the headroom quantity prompt are displayed:

Do you agree? [y|n]: y

Enter a headroom number or press Return to leave the headroom unchanged.

The following prompts are displayed, in order:

Enter the number of COD permits reserved for each domain. The currently

reserved number appears in parentheses. Do not exceed the number of

available COD permits. To leave a reservation unchanged, press Return.