Fujitsu SPARC Enterprise M5000 Посібник з експлуатації - Сторінка 20

Переглянути онлайн або завантажити pdf Посібник з експлуатації для Сервер Fujitsu SPARC Enterprise M5000. Fujitsu SPARC Enterprise M5000 30 сторінок. Rci build procedure
Також для Fujitsu SPARC Enterprise M5000: Додатковий посібник (36 сторінок), Примітки до продукту (44 сторінок), Посібник для початківців (4 сторінок)

Activating COD Resources

When you use the unused COD CPU which is mounted on the COD board you've

purchased, contact our sales representative to purchase the COD permits in

accordance with the number of CPUs which you make available.

To purchase the COD permits, following information is required:

Number of CPUs you newly make available

■

Chassis HostID of the system (when ordering server-specific COD permits)

■

You can verify the Chassis HostID by logging into XSCF console and using the

showcod command.

After you purchase the COD permit, a COD key is sent from Fujitsu.

This procedure tells you how to install the key Fujitsu sent you to activate COD

permits on your server.

If headroom is enabled, this procedure decreases headroom to compensate for the

added COD permits. This automatic reduction in headroom is designed to avoid

accidental abuse of headroom. You can increase headroom again manually after

installation. See

1. Log in to the XSCF console with platadm privileges.

2. Execute the addcodactivation command with the key provided by Fujitsu:

XSCF> addcodactivation key

For example:

XSCF> addcodactivation \

01:84000000:104:0301010100:3:00000000:xxxxxxxxxxxxxxx

SPARC Enterprise Mx000 Servers Capacity on Demand (COD) User's Guide • January 2012

"To Enable, Increase, or Decrease Headroom" on page

11.