Fujitsu SPARC Enterprise M5000 Merkmale Handbuch - Seite 23
Blättern Sie online oder laden Sie pdf Merkmale Handbuch für Server Fujitsu SPARC Enterprise M5000 herunter. Fujitsu SPARC Enterprise M5000 30 Seiten. Rci build procedure
Auch für Fujitsu SPARC Enterprise M5000: Ergänzendes Handbuch (36 seiten), Produkthinweise (44 seiten), Handbuch "Erste Schritte (4 seiten)
Seite drucken
▼ To Enable, Increase, or Decrease Headroom
1. Log in to the XSCF console with platadm privileges.
2. Execute the showcod command with no options.
For example:
XSCF> showcod
Chassis HostID: 80e3e446
PROC Permits installed: 10
PROC Headroom Quantity: 0
PROC Permits reserved for domain 0: 4
PROC Permits reserved for domain 1: 0
PROC Permits reserved for domain 2: 0
PROC Permits reserved for domain 3: 0
3. Type the setcod command, specifying headroom.
For example:
XSCF> setcod headroom
where headroom can be a number from 1 to 4. For example:
XSCF> setcod 4
WAARNING: Using headroom requires you to install key(s) within 30
days.
Do you agree? [y|n]: y
4. Verify the headroom quantity is correct by executing the showcod command.
For example, if you entered 4 as the headroom number, the output would be
similar to:
XSCF> showcod
Chassis HostID: 80d88800
PROC Permits installed: 8
PROC Headroom Quantity: 4
...
Note – When headroom is in use, the XSCF console displays periodic warning
messages requesting installation of new COD permits. The warning messages
continue to be displayed until new keys are installed or headroom is no longer in
use.
Capacity on Demand (COD) Administration
11