Fujitsu SPARC Enterprise M5000 Panduan Fitur - Halaman 23
Jelajahi secara online atau unduh pdf Panduan Fitur untuk Server Fujitsu SPARC Enterprise M5000. Fujitsu SPARC Enterprise M5000 30 halaman. Rci build procedure
Juga untuk Fujitsu SPARC Enterprise M5000: Panduan Tambahan (36 halaman), Catatan Produk (44 halaman), Panduan Memulai (4 halaman)
Halaman Cetak
▼ To Enable, Increase, or Decrease Headroom
1. Log in to the XSCF console with platadm privileges.
2. Execute the showcod command with no options.
For example:
XSCF> showcod
Chassis HostID: 80e3e446
PROC Permits installed: 10
PROC Headroom Quantity: 0
PROC Permits reserved for domain 0: 4
PROC Permits reserved for domain 1: 0
PROC Permits reserved for domain 2: 0
PROC Permits reserved for domain 3: 0
3. Type the setcod command, specifying headroom.
For example:
XSCF> setcod headroom
where headroom can be a number from 1 to 4. For example:
XSCF> setcod 4
WAARNING: Using headroom requires you to install key(s) within 30
days.
Do you agree? [y|n]: y
4. Verify the headroom quantity is correct by executing the showcod command.
For example, if you entered 4 as the headroom number, the output would be
similar to:
XSCF> showcod
Chassis HostID: 80d88800
PROC Permits installed: 8
PROC Headroom Quantity: 4
...
Note – When headroom is in use, the XSCF console displays periodic warning
messages requesting installation of new COD permits. The warning messages
continue to be displayed until new keys are installed or headroom is no longer in
use.
Capacity on Demand (COD) Administration
11