Fujitsu FI-4120C2 - Document Scanner 시작하기 - 페이지 16
{카테고리_이름} Fujitsu FI-4120C2 - Document Scanner에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu FI-4120C2 - Document Scanner 28 페이지. Image scanner
Fujitsu FI-4120C2 - Document Scanner에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 브로셔 및 사양 (2 페이지)
페이지 인쇄
Installation of the scanner driver is completed.
To confirm whether the installation
ATTENTION
was successful, perform a scanning
operation with an application that
complies with the TWAIN regulations
such as ScandAll 21.
■ Installing ScandAll 21
"Scandall 21" is an image capturing software that com-
plies with the TWAIN standard. The FUJITSU TWAIN
32 scanner driver enables you to capture images with a
FUJITSU image scanner fi-series product.
When using Windows NT 4.0, Win-
ATTENTION
dows 2000 or Windows XP, log on as
a user with "Administrator" privileges
(privileges of the administrator of your
PC).
1. Insert the Setup CD-ROM into the CD drive.
⇒
<SETUP DISK START UP SCREEN> appears.
2. Click [INSTALL PRODUCTS].
7
3. Click [ScandAll 21] on the window below.
4. Select a language used for installation on
[Choose Setup Language] window and click
[OK].
5. Install the application following the instructions
on the window.
6. When the [InstallShield Wizard Complete] win-
dow appears, click [Finish].
For finishing the installation, it may be
ATTENTION
necessary to restart your computer.
Follow the instructions on the window.
■ Confirming Installation
1. Load the documents on the scanner.
For details on loading documents, refer to "1.2 Load-
ing Documents on the ADF for Scanning" in the fi-
4120C2 Operator's Guide on the Setup CD-ROM.