Fujitsu FI-4120C2 - Document Scanner 시작하기 - 페이지 18
{카테고리_이름} Fujitsu FI-4120C2 - Document Scanner에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu FI-4120C2 - Document Scanner 28 페이지. Image scanner
Fujitsu FI-4120C2 - Document Scanner에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 브로셔 및 사양 (2 페이지)
페이지 인쇄
■ Installing the FUJITSU ISIS
Scanner Driver
Windows XP screenshots are used in
this section as examples. The windows
HINT
and operations may vary slightly
depending on your OS.
1. Press the power button to turn ON the scanner.
2. Turn your PC on and log on to Windows.
When using Windows NT 4.0, Win-
ATTENTION
dows 2000 or Windows XP, log on as
a user with "Administrator" privileges
(privileges of the administrator of your
PC).
3. If the scanner is automatically detected, [Found
New Hardware Wizard] or [Add/Remove Hard-
ware Wizard] dialog box will appear. Click [Can-
cel] to close the Wizard window.
The windows and operations may vary
slightly depending on your OS.
HINT
4. Insert the "Setup CD-ROM" into the CD drive.
⇒
<SETUP DISK START UP SCREEN> appears.
This screen may not appear when the
ATTENTION
"Autoplay" setting of your PC is OFF.
In this case, run "Install.exe" in this
CD-ROM directly from the "Explorer"
or "My Computer".
9
5. Click [INSTALL PRODUCTS].
6. Click [ISIS Driver] on the window below.
7. Error Recovery Guide Installation window
appears.
Error Recovery Guide is a software that displays
troubleshooting information on screen if any
scanner error occurs. Although this software's
installation is highly recommended, the perfor-
mance of the scanner would not be affected if
not installed.
When you select [Yes] for installing
ATTENTION
Error Recovery Guide, the [Choose
Setup Language] window appears.
Select a language and follow the
instructions on the window. The Error
Recovery Guide will automatically
continue finishing its installation.
Please wait until the installation of
TWAIN driver automatically starts.