Fujitsu FI-4120C2 - Document Scanner 시작하기 - 페이지 20
{카테고리_이름} Fujitsu FI-4120C2 - Document Scanner에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu FI-4120C2 - Document Scanner 28 페이지. Image scanner
Fujitsu FI-4120C2 - Document Scanner에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 브로셔 및 사양 (2 페이지)
페이지 인쇄
4. Continue to install the application following the
instructions on the window.
5. Enter the required information, then click [Next
>] button.
"QuickScan Pro™" included in the
ATTENTION
Setup CD-ROM is an evaluation ver-
sion. For further use after the expira-
tion of its evaluation period of up to 30
launches, it is necessary to purchase
a fully functional version of QuickScan
Pro™. (When you install the evalua-
tion version, do not change the Serial
Number already displayed.)
6. Install the application following the instructions
on the window.
■ Confirming Installation
1. Load the documents on to the scanner.
For details on loading documents, refer to "1.2 Load-
ing Documents on the ADF for Scanning" in the fi-
4120C2 Operator's Guide on the Setup CD-ROM
2. Start QuickScan Pro™.
11
From the [Start] menu, select [Programs]-[Quick-
Scan]-[QuickScan].
3. Select [Select Scanner...] from [Scan] menu in
QuickScan Pro™.
And, select fi-4120C2 from the list of [Scanner:], and
then click the [OK] button.
4. Select [Preview Settings...] from the [Scan]
menu. Set the scan resolution, paper size and
other scanning requirements, and then click
[OK].
5. Select [Preview Scan] from the [Scan] menu.
And then the document is scanned.
If the scanning completes without any trouble, the
installation performed successfully.
.