Fujitsu FI-4120C2 - Document Scanner 시작하기 - 페이지 26
{카테고리_이름} Fujitsu FI-4120C2 - Document Scanner에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu FI-4120C2 - Document Scanner 28 페이지. Image scanner
Fujitsu FI-4120C2 - Document Scanner에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 브로셔 및 사양 (2 페이지)
페이지 인쇄
Appendix 2
•
When operating the scanner,
ARNI N G
the ADF's inside glass
becomes very hot.
Before you clean inside the
scanner, turn off its power and
unplug the AC adapter from the
outlet. Wait for at least
15 minutes.
Do not turn off the scanner
when you clean the Feed roll-
ers or Eject rollers.
•
When you perform cleaning,
make sure that the inside of the
scanner is free of any foreign
object, and be careful not to get
your hand or the cloth caught
on the pick spring (metal part)
as a deformed pick spring
(metal part) may cause injury.
■ Cleaning Materialse
Cleaning
Parts
Materials
Number
Cleaner F1
CA99501-
(or isopropyl
0013
alcohol)
Lint-free dry
Commercially available one
cloth
* For details about cleaning materials, contact the
FUJITSU scanner dealer where you purchased the
scanner.
■ Cleaning Method
The ADF must be cleaned with a lint-free cloth
moistened with the Cleaner F1.
AP-4
DAILY CARE
Remarks
1 bottle
Moisten the cloth
with this fluid and
wipe the scanner
clean.(*)
■ Parts to Clean and When
Part to clean
Pad ASSY
Pick roller
Feed rollers
Plastic rollers
Glass
The scanner must be cleaned fre-
ATTENTION
quently if you scan any of the follow-
ing type of paper sheets:
•
Documents of coated paper
•
Documents that are almost completely
covered with printed text or graphics
•
Chemically treated documents such as
carbonless paper
•
Documents containing a large amount
of calcium carbonate
•
Handwritten documents
For details on the cleaning the ADF, refer to "3.2 Clean-
ing the ADF" in fi-4120C2 Operator's Guide in the
Setup CD-ROM".
Standard Cleaning Cycle
Clean these parts after every
1,000 scans.