Fujitsu FI-4120C2 - Document Scanner 시작하기 - 페이지 27
{카테고리_이름} Fujitsu FI-4120C2 - Document Scanner에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu FI-4120C2 - Document Scanner 28 페이지. Image scanner
Fujitsu FI-4120C2 - Document Scanner에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 브로셔 및 사양 (2 페이지)
페이지 인쇄
Appendix 3
During its operation, the inside
ARNI N G
glass of the ADF becomes very
hot .
Before replacing the
consumables, turn its power off
and unplug the AC adapter from
the outlet. Wait at least
15 minutes.
■ Consumables and Replacement
Cycles
Below are specifications of consumable items and
their recommended replacement cycles.
Parts
Description
Number
Pad ASSY
PA03289-
0111
Pick roller
PA03289-
0001
To purchase consumables, contact the store where you
purchased the scanner or an authorized FUJITSU scan-
ner service provider.
The replacement cycles above are rough guidelines
when using A4 or Letter woodfree or wood containing
2
paper 64 g/m
(17 lb). This cycle varies according to the
type of paper and how frequently the scanner is used and
cleaned.
Use only the specified consumables.
ATTENTION
Do not use other consumables.
REPLACING CONSUMABLES
Standard
Replacement
Cycle
After 50,000 scans
or one year
After 100,000
sheets or one year
fi-4120C2 Image Scanner Getting Started
The illustration below demonstrates the locations of the
replacement parts. Refer to "Chapter 4 Replacing Con-
sumables" fi-4120C2 Operator's Guide on the Setup
CD-ROM.
■ Replacing the Pad ASSY
■ Replacing the Pick Roller
Pick Roller
Pick Roller's Shaft
AP-5