Fujitsu fi-4220C2 시작하기 - 페이지 15

{카테고리_이름} Fujitsu fi-4220C2에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-4220C2 30 페이지. Flatbed scanner
Fujitsu fi-4220C2에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 브로셔 및 사양 (2 페이지), 설치 절차 (3 페이지), 청소 지침 (2 페이지)

페이지 인쇄

3. If the scanner is automatically detected,

[Found New Hardware Wizard] or [Add/

Remove Hardware Wizard] dialog box will

appear. Click [Cancel] to close the Wizard win-

dow.

Windows XP screenshots are used in this section.

The windows and operations may vary

slightly depending on your OS.

HINT

4. Insert the Setup CD-ROM into the CD drive.

⇒

<SETUP DISK START UP SCREEN> appears.

This screen may not appear when the

ATTENTION

"Autoplay" setting of your PC is OFF.

In this case, run "Install.exe" in this

CD-ROM directly from the "Explorer"

or "My Computer".

5. Click [INSTALL PRODUCTS].

6. Click [TWAIN Driver] on the window below.

7. Error Recovery Guide Installation window

appears.

Error Recovery Guide is a software that dis-

plays troubleshooting information on screen

when any scanner error occurs. Although this

software's installation is highly recommended,

the performance of the scanner would not be

affected if not installed.

ATTENTION

8. Select a language used for installation on

[Choose Setup Language] window and click

[OK].

9. Follow the instructions on the window to install

the application.

fi-4220C2 Image Scanner Getting Started

When you select [Yes] for installing

the Error Recovery Guide, [Choose

Setup Language] window appears.

Select a language and follow the

instructions on the window. Error

Recovery Guide will automatically

continue finishing its installation.

Please wait until the installation of

TWAIN driver automatically starts.