Fujitsu fi-4220C2 시작하기 - 페이지 16

{카테고리_이름} Fujitsu fi-4220C2에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-4220C2 30 페이지. Flatbed scanner
Fujitsu fi-4220C2에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 브로셔 및 사양 (2 페이지), 설치 절차 (3 페이지), 청소 지침 (2 페이지)

페이지 인쇄

10. When the [InstallShield Wiizard Complete] win-

dow appears, click [Finish].

Your computer will be restarted and the scanner will be

detected. Do not remove the Setup CD-ROM from the

CD drive until your PC has completely restarted.

Depending on the OS, these opera-

ATTENTION

tions may be necessary.

For Windows 98:

When a request for inserting the CD-

ROM for Windows 98 appears, insert

it into the CD drive and click the [OK]

button.

For Windows 2000:

When [Digital Signature not Found]

appears, click [Yes].

For Windows XP:

1. When [Found New Hardware Wiz-

ard] appears, confirm that the Setup

CD-ROM is set in the CD drive, then

click the [Next] button.

2. When any alarm is displayed on

[Hardware Installation] window,

click the [Continue Anyway] button.

3. Click the [Finish] button.

Installation of the scanner driver is completed.

To confirm whether the installation

ATTENTION

was successful, perform a scanning

operation with an application that

complies with the TWAIN regulations

such as ScandAll 21.

■ Installing ScandAll 21

"Scandall 21" is an image capturing software that com-

plies with the TWAIN standard. The FUJITSU TWAIN

32 scanner driver enables you to capture images with a

FUJITSU image scanner fi-series product

When using Windows NT 4.0, Win-

ATTENTION

dows 2000 or Windows XP, log on as

a user with "Administrator" privileges

(privileges of the administrator of your

PC).

1. Insert the Setup CD-ROM into the CD drive.

⇒

<SETUP DISK START UP SCREEN> appears.

2. Click [INSTALL PRODUCTS].

3. Click [ScandAll 21] on the window below.