Fujitsu fi-4530C 시작하기 - 페이지 25

{카테고리_이름} Fujitsu fi-4530C에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-4530C 27 페이지. Image scanner
Fujitsu fi-4530C에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 브로셔 및 사양 (2 페이지), 설치 절차 (3 페이지), 소모품 교체 및 청소 지침 (14 페이지), 청소 지침 매뉴얼 (13 페이지), 청소 지침 (2 페이지), 사용 설명서 (10 페이지), 설치 절차 (5 페이지)

페이지 인쇄

Appendix2

The glass of the inside of the

ARNI N G

ADF becomes hot during opera-

tion.

When you clean the inside of the

scanner, turn off the power and

unplug the AC adapter from the

outlet and wait for at least three

minutes.

Do not turn off the scanner when

you clean the Feed rollers or

Eject rollers.

■ Cleaning Materials

Cleaning

Parts No.

Materials

Cleaner F1

CA99501-

(or isopropyl

0013

alcohol)

Lint-free dry

- Commercially available one

cloth

For details about the cleaning materials, contact the

FUJITSU scanner dealer where you purchased the scan-

ner.

■ Cleaning Method

The ADF must be cleaned with a lint-free cloth moist-

ened with the Cleaner F1.

AP-4

DAILY CARE

Remarks

1 bottle

Moisten a cloth with

this fluid and wipe the

scanner clean.

■ Locations and Cycle for Cleaning

Part to clean

Pad ASSY

Pick roller

Feed rollers

Plastic rollers

Eject rollers

Sheet guides

Glass

Ultra sonic sensor

The scanner must be cleaned more fre-

ATTENTION

quently if you scan any of the following

type of sheets:

•

Documents of coated paper

•

Documents that are almost com-

pletely covered with printed text or

graphics

•

Chemically treated documents such as

carbonless paper

•

Documents containing a large amount

of calcium carbonate

•

Handwritten documents

For details on the cleaning the ADF, refer to "3.2 clean-

ing the ADF" in fi-4530C Operator's Guide on the Setup

CD-ROM".

Standard Cleaning Cycle

Clean these parts after every

5,000 scans.