Fujitsu fi-4860C 소모품 교체 및 청소 지침 - 페이지 16
{카테고리_이름} Fujitsu fi-4860C에 대한 소모품 교체 및 청소 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-4860C 30 페이지. Production color scanner
Fujitsu fi-4860C에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 설치 절차 (3 페이지), 사양 시트 (2 페이지)
페이지 인쇄
fi-4860C C
R
ONSUMABLE
EPLACEMENT AND
16
C
I
LEANING
NSTRUCTIONS
C
R
LEANING THE
OLLERS WITH THE
The cleaning sheets are designed to remove only loose paper dust and
ink from the rollers. Use them approximately every 50,000 sheets
scanned. They are to be used in between the thorough cleanings of the
scanner. Using the cleaning sheets does not take the place of the
more complete cleanings described later in this section
•
Turn off the scanner.
•
Make sure the Hopper and
Stacker are opened.
•
Set the Hopper Guides to the
B4 width.
•
Access the Offline Feed Test by following the steps below.
•
Turn the scanner on while pressing the S
initializes the LCD displays the screen below.
•
Press the R
A
IGHT
RROW
•
Press the E
Button enter Test Mode.
NTER
•
Press the E
or S
NTER
•
Press the E
or S
NTER
scanner is ready to feed the Cleaning Sheet.
C
S
LEANING
TART
Button once to highlight "TEST".
Buttons access the Test Modes.
TART
Buttons to enter Single Feed Test. The
TART
HEETS
button. Once the scanner