Fujitsu fi-4860C Consumable Replacement And Cleaning Instructions - Page 16
Browse online or download pdf Consumable Replacement And Cleaning Instructions for Scanner Fujitsu fi-4860C. Fujitsu fi-4860C 30 pages. Production color scanner
Also for Fujitsu fi-4860C: Installation Procedures Manual (7 pages), Installation Procedures Manual (9 pages), Installation Procedures (3 pages), Specification Sheet (2 pages)
Print Page
fi-4860C C
R
ONSUMABLE
EPLACEMENT AND
16
C
I
LEANING
NSTRUCTIONS
C
R
LEANING THE
OLLERS WITH THE
The cleaning sheets are designed to remove only loose paper dust and
ink from the rollers. Use them approximately every 50,000 sheets
scanned. They are to be used in between the thorough cleanings of the
scanner. Using the cleaning sheets does not take the place of the
more complete cleanings described later in this section
•
Turn off the scanner.
•
Make sure the Hopper and
Stacker are opened.
•
Set the Hopper Guides to the
B4 width.
•
Access the Offline Feed Test by following the steps below.
•
Turn the scanner on while pressing the S
initializes the LCD displays the screen below.
•
Press the R
A
IGHT
RROW
•
Press the E
Button enter Test Mode.
NTER
•
Press the E
or S
NTER
•
Press the E
or S
NTER
scanner is ready to feed the Cleaning Sheet.
C
S
LEANING
TART
Button once to highlight "TEST".
Buttons access the Test Modes.
TART
Buttons to enter Single Feed Test. The
TART
HEETS
button. Once the scanner