Fujitsu fi-5650C 시작하기 매뉴얼 - 페이지 18

{카테고리_이름} Fujitsu fi-5650C에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-5650C 40 페이지. Image scanner
Fujitsu fi-5650C에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 설치 절차 (3 페이지), 사양 (2 페이지), 브로셔 및 사양 (2 페이지), 사용 설명서 (11 페이지), 소모품 교체 및 청소 지침 (19 페이지), 청소 지침 (2 페이지), 청소 및 유지 관리 (39 페이지)

2.1 Installing the scanner

Place the scanner at its installation site.

This scanner can be placed with the ADF

paper chute facing either right or left side of

the installing location.

For details on the scanner's dimensions

and required installation space, refer to "10

SCANNER SPECIFICATION" in the "fi-

5650C Operator's guide".

Setting the ADF Paper Chute.

Hold the ADF paper chute and insert

its tabs into the holes on the rear side

of the ADF as shown in the figure

below so that the side guides facing

upwards.

Setting the Stacker

Mount the Stacker onto the scanner

aligning the protrusions to the holes on the

scanner.

You can fix the stacker at two positions: the

upper position or the lower position.

2-2

Connecting the AC cable.

Open the cable cover located below the

ADF paper chute and insert the AC cable

into the power inlet.

Once the cable is connected, close the

cable cover.

Lead out the AC cable from the conduit

located at the bottom of both sides of the

cable cover.

<When leading out the AC cable from the

right side>

Cable

cover