Fujitsu fi-5650C 시작하기 매뉴얼 - 페이지 36

{카테고리_이름} Fujitsu fi-5650C에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-5650C 40 페이지. Image scanner
Fujitsu fi-5650C에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 설치 절차 (3 페이지), 사양 (2 페이지), 브로셔 및 사양 (2 페이지), 사용 설명서 (11 페이지), 소모품 교체 및 청소 지침 (19 페이지), 청소 지침 (2 페이지), 청소 및 유지 관리 (39 페이지)

Fujitsu fi-5650C 시작하기 매뉴얼

Temporary Error

Indication
Meaning
U1
A paper feed error occurred.
U2
A double feed error occurred.
U4
The ADF cover is opened.
U6
The print cartridge is not
installed. (*)
U7
A paper detection
failure has occurred at
Imprinter.(*)
The following shows the procedure for
resolving of each temporary error.
"U1" error
Remove jammed documents.
Confirm that the documents meet the paper
conditions for scanning.
Refer to Chapter 6 "TROUBLE SHOOTING" in the
"fi-5650C Operator's Guide".
"U2 " error
Remove jammed documents
Confirm that the documents meet the paper
conditions for scanning.
Refer to "8 DOCUMENT SPECIFICATION OF
ADF" of the "fi-5650C Operator's Guide".
"U4" error
Close the ADF cover completely.
For details, refer to "6 TROUBLESHOOTING" in
the "fi-5650C Operator's Guide".
* "U6" and "U7" are temporary errors related with the
Imprinter option (sold separately)
Device alarm
(Permanent error)
When you encounter any alarm, turn OFF and
ON the scanner. If the alarm is still displayed
on the Function No. display, contact the dealer
where you purchased the scanner or an
authorized FUJITSU scanner service provider.
AP-6
TABLE 2.
Indication
Meaning
E2
Optical error (ADF front).
E3
Optical error (ADF back).
E4
Motor fuse malfunction.
E5
Lamp fuse malfunction.
E6
Operator panel malfunction.
E7
EEPROM malfunction.
E8
SCSI interface fuse
malfunction.
E9
Image memory malfunction.
EA
Imprinter malfunction. (*)
Ec
Memory malfunction.
Ed
Malfunction at SCSI interface
controller.
EF
Background switching
mechanism malfunction.
E10
ROM malfunction.
E11
Fan malfunction.
E12
Heater malfunction.
E15
Malfunction in the additional
memory option.
E16
Option board malfunction.
E17
Imprinter fuse malfunction. (*)
E18
Sensor malfunction.
E19
LSI malfunction.
E1A
Internal communication
malfunction.
* "EA" and "E17" are alarms related with the
Imprinter option (sold separately).
About Error Recovery Guide
HINT
When this software is installed on your
PC, the icon appears in the task tray
when Windows is started up. If any
device alarm or temporary error
occurred, the Error Recovery Guide win-
dow appears and displays information
such as error names and error codes
regarding the alarm. Record the informa-
tion and click [Details...] to know more
detailed information for trouble shooting.
TABLE 3.