Fujitsu FI-6240 시작하기 - 페이지 16

{카테고리_이름} Fujitsu FI-6240에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu FI-6240 23 페이지. Image scanner
Fujitsu FI-6240에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (6 페이지), 사양 (2 페이지), 시작하기 매뉴얼 (20 페이지), 사용 설명서 (10 페이지)

페이지 인쇄

2.4 Checking Scanner Driver

Operation

This section explains how to check the operation of the

installed scanner driver by using ScandAll PRO.

Make sure that the scanner driver is installed properly,

following the procedure below.

Load the document on the scanner.

For information about how to load the document, refer

to section "2.2 Loading Documents on the ADF for

Scanning" in "fi-6140/fi-6240/fi-6130/fi-6230

Operator's Guide."

Launch ScandAll PRO.

From the [start] menu, select [All Programs]

[Fujitsu ScandAll PRO]

In ScandAll PRO, select [Tool] on the menu, and

then select [Preferences].

⇒

The [Setup] dialog box appears.

On the [Scan] tab, select a driver.

To check the operation of FUJITSU TWAIN 32, select

[TWAIN].

To check the operation of FUJITSU ISIS, select [ISIS].

Click the [OK] button to close the [Setup] dialog

box.

In ScandAll PRO, select [Scan] on the menu, and

then select [Select Scanner].

[Fujitsu ScandAll PRO].

Select a scanner in the displayed dialog box.

To use FUJITSU TWAIN 32:

Select [FUJITSU fi-6140dj], [FUJITSU fi-6240dj],

[FUJITSU fi-6130dj], or [FUJITSU fi-6230dj], and

then click the [Select] button.

To use FUJITSU ISIS:

Select [Fujitsu fi-6140], [Fujitsu fi-6240],

[Fujitsu fi-6130], or [Fujitsu fi-6230], and then click

the [Select] button.

Select [Scan] on the menu, and then select [Scan

Settings].

In the [Scan Settings] dialog box, clear the [Save to

file] checkbox.

You only check the operation now, so you do not have to

save to file.