Fujitsu fi-6770 Series 사용자 설명서 - 페이지 24
{카테고리_이름} Fujitsu fi-6770 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-6770 Series 26 페이지. Image scanner
Fujitsu fi-6770 Series에 대해서도 마찬가지입니다: 설치 절차 매뉴얼 (6 페이지), 브로셔 (2 페이지), 시작하기 매뉴얼 (14 페이지), 시작하기 매뉴얼 (26 페이지), 소모품 교체 및 청소 지침 (22 페이지)
10
Select the [Scan] menu
The [Scan Settings] dialog box appears.
11
Clear the [Save to file] checkbox.
12
Click the [Scanner Setting] button.
The scanner driver's setting dialog box appears.
13
Configure scanner settings such as the resolution and paper size.
■
FUJITSU TWAIN 32 scanner driver
Configure scan settings, and then click the [OK]
button.
■
FUJITSU ISIS scanner driver
Configure scan settings, and then click the [OK]
button.
24
If "Kofax VRS Scanner" does not appear in the list, check if the interface cable is properly connected
to SCSI/USB Connector 2.
If "Kofax VRS Scanner" does not appear even after you have connected the cable properly, then refer
to "Chapter 8 Troubleshooting" in the Operator's Guide.
[Scan Settings].
You only check the operation now, so you do not have to
save to file.
The setting dialog box of the scanner driver
may be displayed again after the [OK] button
is clicked. In such case, click the [Scan]
button in the dialog box.