Fujitsu fi-6770 Series 시작하기 매뉴얼 - 페이지 14

{카테고리_이름} Fujitsu fi-6770 Series에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-6770 Series 26 페이지. Image scanner
Fujitsu fi-6770 Series에 대해서도 마찬가지입니다: 사용자 설명서 (26 페이지), 설치 절차 매뉴얼 (6 페이지), 브로셔 (2 페이지), 시작하기 매뉴얼 (14 페이지), 소모품 교체 및 청소 지침 (22 페이지)

페이지 인쇄

3) Gently close the Document Cover.

4) Change the position of the ADF.

AUTION

The ADF can be set to any of the following three positions:

After repositioning the ADF, be sure that the ADF is firmly locked to the new position.

■

Traditional (Factory default)

■

Standard (Space-saving type and for right-handed

operators)

Slide the ADF toward the center of the scanner.

Note the following explanation in this manual is based upon

this standard type of the scanner.

■

Reversed (Space-saving type and for left-handed

operators)

Slide the ADF toward the center of the scanner, and then

rotate it counterclockwise by 180 degree.

Attach the Stacker and the ADF Paper Chute to the scanner.

1) Insert the hooks of the ADF Paper Chute into their corresponding holes on the scanner.

2) Fit the protruding sections of the Stacker into their corresponding slots on the scanner.

Protruding section

• Be careful not to pinch your fingers when moving the ADF.

• Never rotate the ADF by more than 180 degree. Doing so may damage the ADF.

Hook