Fujitsu fi-7300NX 소모품 교체 및 청소 지침 - 페이지 11

{카테고리_이름} Fujitsu fi-7300NX에 대한 소모품 교체 및 청소 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-7300NX 27 페이지. Image scanner
Fujitsu fi-7300NX에 대해서도 마찬가지입니다: 시작하기 (2 페이지)

페이지 인쇄
Fujitsu fi-7300NX 소모품 교체 및 청소 지침
d. On the touch screen, press the [Start] button on the [Cleaning Wipe] screen.
The feed/eject rollers rotate a certain amount simultaneously.
If you press and hold the [Start] button, the feed/eject rollers rotate continuously.
Be careful not to touch the rollers with your hand while they are rotating.
e. Put a piece of cloth moistened with Cleaner F1 or a sheet of Cleaning Wipe against the surface of the
rotating feed/eject roller, and wipe horizontally to clean dirt and dust off the whole surface.
Make sure that it is wiped properly because black residue on the rollers will affect the feeding
performance.
4. Close the ADF.
Be careful not to get your fingers caught when closing the ADF.
ATTENTION
Confirm that the ADF is closed properly. Otherwise, documents may not be fed into the ADF.
5. Clear the sheet counter after cleaning.
a.
On the touch screen, press
b.
On the [Consumable counters] screen, press the [Clear] button for [After cleaning].
-> [Cleaning & Maintenance] -> [Consumable counters].