Fujitsu fi-7300NX Instrukcje wymiany i czyszczenia materiałów eksploatacyjnych - Strona 11
Przeglądaj online lub pobierz pdf Instrukcje wymiany i czyszczenia materiałów eksploatacyjnych dla Skaner Fujitsu fi-7300NX. Fujitsu fi-7300NX 27 stron. Image scanner
Również dla Fujitsu fi-7300NX: Pierwsze kroki (2 strony)
Drukuj stronę
d. On the touch screen, press the [Start] button on the [Cleaning Wipe] screen.
The feed/eject rollers rotate a certain amount simultaneously.
If you press and hold the [Start] button, the feed/eject rollers rotate continuously.
Be careful not to touch the rollers with your hand while they are rotating.
e. Put a piece of cloth moistened with Cleaner F1 or a sheet of Cleaning Wipe against the surface of the
rotating feed/eject roller, and wipe horizontally to clean dirt and dust off the whole surface.
Make sure that it is wiped properly because black residue on the rollers will affect the feeding
performance.
4. Close the ADF.
Be careful not to get your fingers caught when closing the ADF.
ATTENTION
Confirm that the ADF is closed properly. Otherwise, documents may not be fed into the ADF.
5. Clear the sheet counter after cleaning.
a.
On the touch screen, press
b.
On the [Consumable counters] screen, press the [Clear] button for [After cleaning].
-> [Cleaning & Maintenance] -> [Consumable counters].