Fujitsu fi-7300NX Instrukcje wymiany i czyszczenia materiałów eksploatacyjnych - Strona 9
Przeglądaj online lub pobierz pdf Instrukcje wymiany i czyszczenia materiałów eksploatacyjnych dla Skaner Fujitsu fi-7300NX. Fujitsu fi-7300NX 27 stron. Image scanner
Również dla Fujitsu fi-7300NX: Pierwsze kroki (2 strony)
Drukuj stronę
Brake Roller (x 2)
Remove the brake roller from the scanner.
Gently wipe off any dirt or dust along the grooves, taking care not to damage the roller surface.
Pick Roller (x 2)
Gently wipe off any dirt or dust along the grooves as you rotate the roller manually, taking care not to damage
the roller surface. Make sure that it is wiped properly because black residue on the rollers will affect the feeding
performance.
Plastic Idler Roller (x 4)
Gently wipe dirt and dust off the roller, taking care not to damage the roller surface. Make sure that it is wiped
properly because black residue on the rollers will affect the feeding performance.
Be careful not to damage the sponge that is attached to the plastic idler roller.
Glass (x 2)
Gently wipe dirt and dust off the surface of the glass sections.
ATTENTION
Vertical streaks may appear on images if the glass is dirty.
Ultrasonic Sensor (x 2) / Document Sensor (x 8)
Gently wipe dirt and dust off the surface of the ultrasonic and document sensors.