Fujitsu fi-7300NX Instrukcje wymiany i czyszczenia materiałów eksploatacyjnych - Strona 13
Przeglądaj online lub pobierz pdf Instrukcje wymiany i czyszczenia materiałów eksploatacyjnych dla Skaner Fujitsu fi-7300NX. Fujitsu fi-7300NX 27 stron. Image scanner
Również dla Fujitsu fi-7300NX: Pierwsze kroki (2 strony)
Drukuj stronę
Replacing the Consumables
This section explains how to replace the consumables for the scanner.
The inside of the ADF becomes very hot when the scanner is being used.
Before you replace the consumables, make sure to turn off the power, unplug the power cable and wait for at least
15 minutes for the inside of the ADF to cool down.
Consumables and Replacement Cycles
Consumables need to be replaced periodically. It is recommended that you keep a stock of new consumables and
replace them before it reaches the end of the consumable life. Also, the scanner records the number of sheets scanned
for each consumable (brake roller and pick roller), which allows you to determine when to replace the consumables.
The procedure to check the number of sheets scanned is as follows.
1. On the touch screen, press
2.
On the [Consumable counters] screen, check the [After Replacing the Brake Roller] and
[After Replacing the Pick Roller] counters.
o When the background color of the counter is yellow
It is about time to replace the brake roller or pick roller.
o When the background color of the counter is red
It is time to replace the brake roller or pick roller. Replace the brake roller or pick roller.
-> [Cleaning & Maintenance] -> [Consumable counters].