Fujitsu Fujitsu fi-5950 시작하기 - 페이지 8
{카테고리_이름} Fujitsu Fujitsu fi-5950에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Fujitsu fi-5950 27 페이지. Image scanner
Fujitsu Fujitsu fi-5950에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지), 소모품 교체 및 청소 지침 (24 페이지), 시작하기 (11 페이지)
Do not install the scanner in the following
locations which are subject to high
temperature, humidity, less ventilation, or dust.
If placed in an area subject to high
temperature, the cover may become
overheated and deformed, causing the
scanner to become hot, resulting in a fire.
•
A place near heat-radiating devices such as
stoves or electric heaters, or flammable
items such as volatile inflammable materials
or curtain.
•
A place such as a bathroom, shower room,
or swimming pool where it may easily get
wet.
•
A place under direct sunlight, in a car under
the scorching sun, or near heating apparatus
where it may get hot.
To avoid injuries, do not place the scanner in
an area where small children may be able to
reach.
Before moving the scanner, be sure to
disconnect the power cable from the AC outlet,
and all other interface cables. Make sure that
the floor is free of any obstructions.
Do not move the scanner with the power and
interface cables connected as this can damage
the cables, which can later cause a fire, electric
shock as well as injuries.
Do not touch the power cable with wet hands.
Doing so might cause an electric shock.
When removing the power cable from the AC
outlet, make sure to hold the power plug and
not the cable. Pulling the power cable may
damage it, which may cause a fire or electric
shock.
Do not use a damaged power cable. Also, do
not insert any cables or power plugs into loose
sockets. Doing so may cause a fire or electric
shock.
Be careful of the following when handling the
power cable:
•
Do not modify the power cable.
•
Do not place heavy objects on the power
cable.
•
Do not pull or bend the power cable.
If the power cable is damaged, contact your
FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.
Do not place heavy objects on the scanner or
perform other work on top of the scanner.
Doing so might cause injuries or an equipment
failure.
Do not use the scanner while covered with a
blanket, etc. Doing so may raise the
temperature inside and cause a fire.
Avoid getting a sleeve, necktie, or hair caught
up in any scanner mechanism during scanning
since this may cause injuries.
Do not touch the heated section such as the
bottom of the scanner for a long time. Doing so
may cause a low-temperature burn on your
skin.
When the scanner is not going to be used for a
long period of time, be sure to disconnect the
power cable from the AC outlet. Not doing so
may cause a fire or electric shock.
Do not use any aerosol sprays or alcohol
based sprays to clean the scanner. Dust blown
up by strong air from the spray may enter the
inside of the scanner. This may cause the
scanner to fail or malfunction. Sparks, caused
by static electricity, generated when blowing off
dust and dirt from the outside of the scanner
may cause a fire.
Check the following items once a month:
•
The power cable is firmly inserted into the
AC outlet.
•
The power cable is not emitting abnormal
heat, or the power cable is not rusted or
bent.
•
Dust is not accumulated on the power cable.
If so, wipe off any dust with a soft, dry cloth.
•
The power cable does not have any cracks
or scratches.
If any abnormality is detected, contact your
FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.
Make sure to ground to avoid electric shock.
Be sure to ground before plugging into the AC
outlet. Unplug from the outlet before removing
the ground connection.
vi