Fujitsu Fujitsu fi-5950 시작하기 - 페이지 9
{카테고리_이름} Fujitsu Fujitsu fi-5950에 대한 시작하기을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu Fujitsu fi-5950 27 페이지. Image scanner
Fujitsu Fujitsu fi-5950에 대해서도 마찬가지입니다: 브로셔 및 사양 (4 페이지), 소모품 교체 및 청소 지침 (24 페이지), 시작하기 (11 페이지)
페이지 인쇄
AUTION
When installing the scanner on a table, make
sure that the table is flat and level. Place the
scanner so that none of its parts extend beyond
the edge of the table, otherwise it may fall or
collapse and cause injuries.
Install the scanner away from strong magnetic
fields and other sources of electronic noise.
Protect the scanner against any static
electricity and choose a static-free place to
install the scanner.
Static electricity can cause the scanner to
malfunction.
If there is an electrical storm, disconnect the
power cable from the AC outlet. Lightening can
travel through wires and water pipes and
damage the scanner, which may damage your
property.
Do not supply the power from the AC outlet
where the devices requiring much power such
as copying machines or paper shredders are
connected.
Do not block the ventilation ports. Blocking the
ventilation ports generates heat inside of the
scanner, which may result in a fire or scanner
failure.
Do not use the scanner immediately after
moving it from a cold place into a warm room.
Condensation may occur, which might lead to
scanning errors. Let the scanner dry for one or
two hours before you use it.
When handling documents, be careful not to
cut your fingers with them.
When carrying the scanner outside while it is
raining or snowing, pay special attention so the
scanner does not get wet.
If the scanner gets wet, wipe it or wait until it
dries.
When transporting the scanner, never carry it
alone. The scanner is heavy.
vii