Fujitsu Fujitsu fi-5950 Початок роботи - Сторінка 9

Переглянути онлайн або завантажити pdf Початок роботи для Сканер Fujitsu Fujitsu fi-5950. Fujitsu Fujitsu fi-5950 27 сторінок. Image scanner
Також для Fujitsu Fujitsu fi-5950: Брошура та технічні характеристики (4 сторінок), Інструкції із заміни витратних матеріалів та очищення (24 сторінок), Початок роботи (11 сторінок)

AUTION

When installing the scanner on a table, make

sure that the table is flat and level. Place the

scanner so that none of its parts extend beyond

the edge of the table, otherwise it may fall or

collapse and cause injuries.

Install the scanner away from strong magnetic

fields and other sources of electronic noise.

Protect the scanner against any static

electricity and choose a static-free place to

install the scanner.

Static electricity can cause the scanner to

malfunction.

If there is an electrical storm, disconnect the

power cable from the AC outlet. Lightening can

travel through wires and water pipes and

damage the scanner, which may damage your

property.

Do not supply the power from the AC outlet

where the devices requiring much power such

as copying machines or paper shredders are

connected.

Do not block the ventilation ports. Blocking the

ventilation ports generates heat inside of the

scanner, which may result in a fire or scanner

failure.

Do not use the scanner immediately after

moving it from a cold place into a warm room.

Condensation may occur, which might lead to

scanning errors. Let the scanner dry for one or

two hours before you use it.

When handling documents, be careful not to

cut your fingers with them.

When carrying the scanner outside while it is

raining or snowing, pay special attention so the

scanner does not get wet.

If the scanner gets wet, wipe it or wait until it

dries.

When transporting the scanner, never carry it

alone. The scanner is heavy.

vii